Products/Applications
Our Products
Cal-Bay Controls represents the following leading manufacturers of high-quality engineered products:
TELEDYNE-ADVANCED POLLUTION INSTRUMENTATION:
Teledyne-API is one of the world’s leading manufacturers of U.S. EPA approved Ambient and Source level analyzers for NO/NO2/NOx, NOy, SO2, O3, CO, CO2, O2, N2O, NH3, TRS and H2S measurements. These analyzers are used by many of the major OEM suppliers of environmental monitoring systems, and are also a popular choice for replacement of old, existing analyzers that are unreliable or no longer meet performance requirements. T-API also provides a proven dynamic calibrator for use with its analyzer products, as well as a zero-air generation system.Teledyne-API is one of the world’s leading manufacturers of U.S. EPA approved Ambient and Source level analyzers for NO/NO2/NOx, NOy, SO2, O3, CO, CO2, O2, N2O, NH3, TRS and H2S measurements. These analyzers are used by many of the major OEM suppliers of environmental monitoring systems, and are also a popular choice for replacement of old, existing analyzers that are unreliable or no longer meet performance requirements. T-API also provides a proven dynamic calibrator for use with its analyzer products, as well as a zero-air generation system.
CEMTEK ENVIRONMENTAL:
Cemtek Environmental is a leading supplier of continuous emissions monitoring systems (CEMS) and data acquisition and handling systems (DAHS) for regulatory compliance and plant operational performance. Cemtek CEMS/DAHS systems are available to measure single or multiple gases, including NO, NO2, NOx, CO, CO2, O2, SO2, H2S, TRS, NH3 and can be provided in either fully-extractive or dilution-extractive configurations. These systems can be provided in simple rack-mounts, NEMA enclosures or fully-equipped instrument shelters. Systems are also available for inlet/outlet FGD scrubber and SCR/NSCR NOx control applications. DAHS options include USEPA 40CFR60 and 75, RECLAIM and EDR, etc. Standardized systems are available for simple applications, and custom designs are available for difficult applications and/or to meet custom plant and regulatory requirements. CEMS service contracts and support services are also available.Cemtek Environmental is a leading supplier of continuous emissions monitoring systems (CEMS) and data acquisition and handling systems (DAHS) for regulatory compliance and plant operational performance. Cemtek CEMS/DAHS systems are available to measure single or multiple gases, including NO, NO2, NOx, CO, CO2, O2, SO2, H2S, TRS, NH3 and can be provided in either fully-extractive or dilution-extractive configurations. These systems can be provided in simple rack-mounts, NEMA enclosures or fully-equipped instrument shelters. Systems are also available for inlet/outlet FGD scrubber and SCR/NSCR NOx control applications. DAHS options include USEPA 40CFR60 and 75, RECLAIM and EDR, etc. Standardized systems are available for simple applications, and custom designs are available for difficult applications and/or to meet custom plant and regulatory requirements. CEMS service contracts and support services are also available.
M & C PRODUCTS ANALYSIS TECHNOLOGY:
M&C Products provides gas sampling and conditioning equipment for use in environmental monitoring and industrial process applications. Products include several versions of extractive and dilution stack sample probes, sample filters and flowmeters, sample pumps, thermoelectric and compressor coolers for new and replacement environmental monitoring applications, prepackaged sample handling sub-systems and sample flow control drawers for OEM system integrators, portable sample handling and conditioning systems, and a line of Oxygen analyzers. Many of these products are available for use in general-purpose or explosive and/or hazardous area classifications. M&C also provides custom engineering design and product development for customers who need special equipment for unique applications. M&C Products provides gas sampling and conditioning equipment for use in environmental monitoring and industrial process applications. Products include several versions of extractive and dilution stack sample probes, sample filters and flowmeters, sample pumps, thermoelectric and compressor coolers for new and replacement environmental monitoring applications, prepackaged sample handling sub-systems and sample flow control drawers for OEM system integrators, portable sample handling and conditioning systems, and a line of Oxygen analyzers. Many of these products are available for use in general-purpose or explosive and/or hazardous area classifications. M&C also provides custom engineering design and product development for customers who need special equipment for unique applications.
BASELINE-MOCON:
FID and PID analyzers and Gas Chromatographs for a wide variety of gas measurement applications, including: Total hydrocarbon (THC) measurements; Volatile Organic Compounds (VOC); Methane/Non-methane (M/NMHC); BTEX and ETO, and various other gases. Baseline offers analyzers for on-line industrial process, environmental and safety monitoring for indoor and outdoor installations, mud-logging and specialty gas, etc. Baseline also offers a "plug-in" PID sensor for use in OEM applications.FID and PID analyzers and Gas Chromatographs for a wide variety of gas measurement applications, including: Total hydrocarbon (THC) measurements; Volatile Organic Compounds (VOC); Methane/Non-methane (M/NMHC); BTEX and ETO, and various other gases. Baseline offers analyzers for on-line industrial process, environmental and safety monitoring for indoor and outdoor installations, mud-logging and specialty gas, etc. Baseline also offers a "plug-in" PID sensor for use in OEM applications.
CEMTEK INSTRUMENTS:
Cemtek Instruments provides Oxygen (O2) and Carbon Monoxide (CO) analyzers for combustion control and optimization, Opacity and Particulate Monitors, NOx/O2 monitoring systems for SCR control, and AQM ambient monitoring systems for industrial and utility power plant environmental applications and process monitoring. Cemtek Instruments
EMRC:
EMRC provides pitot-tube and annubar flow monitoring equipment for EPA compliance.EMRC provides pitot-tube and annubar flow monitoring equipment for EPA compliance.
ECOM USA: ECOM America Ltd. Is a leading supplier of portable analyzers for emissions testing and combustion gas analysis. ECOM analyzers are available to measure single or multiple gases, including NO, NO2, CO, CO2, O2, SO2 and combustibles, and several models are approved for use by the USEPA as well as state and regional air quality regulatory agencies. ECOM America Ltd. Is a leading supplier of portable analyzers for emissions testing and combustion gas analysis. ECOM analyzers are available to measure single or multiple gases, including NO, NO2, CO, CO2, O2, SO2 and combustibles, and several models are approved for use by the USEPA as well as state and regional air quality regulatory agencies.
MATHESON TRI-GAS:
Calibration (span and zero) gases, gas generators, pressure regulators, gas cylinder racks and cabinets, and gas detection systems for single or multi-point monitoring of toxic and hazardous gases. Calibration (span and zero) gases, gas generators, pressure regulators, gas cylinder racks and cabinets, and gas detection systems for single or multi-point monitoring of toxic and hazardous gases.
CILAS:
CILAS provides particle size and shape analyzers for use in materials handling, quality control, research and development, etc. in the pharmaceuticals, mining, building materials, paint and other industries.
Applications for Our Products
Application Product Manufacturer ______
Ambient-level monitoring Chemiluminescent NOx Teledyne-API
(USEPA Reference Method) UltraViolet Fluorescence SO2 Teledyne-API
and Fence-line monitoring Gas Filter Correlation IR CO Teledyne-API
Gas Filter Correlation IR CO Teledyne-API
UltraViolet Absorption O3 Teledyne-API
Chemiluminescent NH3 Teledyne-API
Ultra-sensitive analyzers Teledyne-API
FID THC Baseline M/NMHC Baseline
M/NMHC Baseline
FID or PID/GC for VOC's Baseline
Source-level monitoring Chemi. NO/NO2/NOx Teledyne-API
(for CEMS/EPA Compliance) Chemi. NO/NO2/NOx California Analytical (CAI)
GFC CO Teledyne-API, CAI
GFC CO2 Teledyne-API, CAI
Paramagnetic O2 T-API, CAI, M&C
GFC HCl Teledyne-API
Tunable Laser Diode HCl Cemtek
Chemi. NH3 Teledyne-API, CAI
Tunable Laser Diode NH3 Cemtek
UV Fluorescence SO2 Teledyne-API
UV Fluorescence TRS/TS Teledyne-API, CAI
FID THC Baseline
M/NMHC Baseline
Continuous Emissions Dilution-Extractive CEMS Cemtek, CBC
Monitoring Systems (CEMS) Fully-Extractive CEMS Cemtek, CBC
SCR/NSCR Control Systems Cemtek, CBC
FGD Control Systems Cemtek, CBC
Portable CEMS ECOM
Data Acquisition/Reporting (DAS) Cemtek, Agilaire
Flow Monitoring Pitot-tube gas flow monitors EMRC
Annubar EMRC
Sample Conditioning Gas Sample Probes M&C
Gas Sample Conditioners/Chillers M&C
Gas Sample Flow Panels M&C
Sample Transport Sample pumps M&C
Heated/Unheated Sample Line M&C
Sample Filters Gas Sample Coalescing Filters M&C
Combustion Control O2/Combustibles Cemtek
Portable Multi-Gas ECOM
Industrial Process all of above analyzers plus:
(Gas) Monitoring IR, GFC/IR, Photoacoustic IR CAI/INNOVA
FTIR for Organics CAI/INNOVA
Gas Chromatographs Baseline
Safety/Industrial Hygiene FID and PID GCs Baseline
Monitoring
Toxic/Hazardous gases FID and PID GCs Baseline
Laboratory/R&D Particle size analyzers Cilas USA
FID and PID GCs Baseline
Calibration Dynamic, Multi-gas Calibrators Teledyne-API
Certified Calibration Gases Matheson
Gas regulators & manifolds Matheson
Zero-air Systems Matheson, Teledyne-API
